Custom PC, Issue 163

Custom PC Issue 163My work for Hobby Tech this month involved rather more soldering than is usual, in order to assemble the parts required for reviews of the Boldport Club’s Ligemdio and Touchy kits and the Dark Control Raspberry Pi motor control boards – though, at least, the final review of the freshly-launched Debian+Pixel Linux distribution was free of fumes.

First, the Boldport Club. I’ve reviewed one of Saar Drimer’s impressively artistic circuit kits before, back in November 2015, but where you used to have to camp out on the Boldport website to pick up the latest small-production-run kit there’s a new option: monthly subscription. Members of the Boldport Club get a series of parcels, typically but not always including a kit featuring a Saar-designed printed circuit board but almost always being aimed more at the experienced engineer than the absolute beginner.

For a flavour of what Boldport Club members can expect, Saar sent over two kits: the Touchy, a touch-sensitive microcontroller dedicated to the memory of maker Oliver Coles, and the Ligemdio, a handy-dandy USB-powered LED tester. The latter proved far simpler to build than the former: anyone used to beginner through-hole kits would undeniably find the surface mount components on the Touchy a challenge, but therein lies its attraction.

The soldering on the Dark Control boards, by contrast, was considerably less tricky. Created by the Dark Water Foundation and funded via Kickstarter, the Dark Control boards – one for DC motors and the other for ESC motors – are impressive beasts. Designed to mimic the footprint of the diminutive Raspberry Pi Zero, the boards include the ability to run a minimum of six independent motors, include room for a nine-degree sensor add-on, and can be linked to remote control hardware for network-free control of everything from submarines to aerial drones.

Finally, Debian+Pixel is Raspbian for the masses. Like Raspbian, Debian+Pixel is built on top of Debian Linux; like Raspbian, Debian+Pixel uses the Pixel desktop environment; like Raspbian, Debian+Pixel includes a selection of educational software chosen by the Raspberry Pi community. Unlike Raspbian, though, Debian+Pixel runs on almost any x86 PC – meaning you don’t need a Raspberry Pi.

The software is, as you’d expect from a distribution based on one of the oldest Linux variants around, stable. The Pixel interface looks the same whether you’re running on a Pi or a traditional PC, and only the speed at which programs open and run gives it away. Sadly, there are one or two omissions largely as a result of licensing agreements: the handy Wolfram Alpha application is nowhere to be found, as is the extremely buggy Minecraft Pi Edition that saw one release back in 2013 before being abandoned by the now Microsoft-owned Mojang.

For the full run-down of all these shiny things, plus a whole bunch of other stuff written by people who aren’t me, you can pick up the latest Custom PC magazine in your nearest supermarket, newsagent, or electronically via Zinio and similar digital distribution platforms.

The MagPi, Issue 50

The MagPi Issue 50This month’s MagPi magazine is a little bit special: it’s Issue 50, celebrated with a shiny foil cover in the physical edition. Inside, you’ll find two pieces of mine: an interview with Dark Water Foundation’s Barry Getty regarding his Dark Control motor boards, and a review of the Sugru Rebel Tech Kit which should be heading to shelves in time for Christmas shopping.

I first met Barry at the Liverpool MakeFest event in 2015, where he was running a workshop to build Arduino-based LEGO remote operated submersible vehicles (ROSVs) which could be piloted through an obstacle course installed in a fish tank at the end of the table. When he got back in touch a year later to show off his Raspberry Pi motor control board add-ons, I knew I needed to interview him on the topic.

The Dark Control boards differ from most motor control boards available in their scope: both models, designed for ESC and DC motor types, include six outputs for full freedom of movement. Various extras, including GPIO pass-through and room for additional hardware, are included, and it’s little surprise to find that Barry’s Kickstarter campaign closed with 145 per cent of its goal funding.

The Sugru kit, meanwhile, is something of a passion of mine. I’ve lost count of the number of things I’ve fixed around the house thanks to “mouldable glue” Sugru, and when they got in touch with details of an upcoming introductory kit I jumped at the chance to have a look. The bundle includes a storage tin, guitar pick for moulding, four packs of Sugru, and a full-colour booklet of projects. If you’re familiar with Sugru, there’s nothing there that’s a must-have compared to just buying a plain pack of the stuff, but if you’re introducing others to the wonderful putty that hardens into silicone rubber it’s a fantastic bundle.

Finally, the book review section of the magazine includes a pleasant surprise: a review of my Raspberry Pi User Guide Fourth Edition, in which it is described as “a reference which will become as essential as its three predecessors.” High praise indeed!

The MagPi Issue 50 is available in all good newsagents and supermarkets now, or can be downloaded free of charge in Creative Commons-licensed PDF format from the official website.