Custom PC, Issue 163

Custom PC Issue 163My work for Hobby Tech this month involved rather more soldering than is usual, in order to assemble the parts required for reviews of the Boldport Club’s Ligemdio and Touchy kits and the Dark Control Raspberry Pi motor control boards – though, at least, the final review of the freshly-launched Debian+Pixel Linux distribution was free of fumes.

First, the Boldport Club. I’ve reviewed one of Saar Drimer’s impressively artistic circuit kits before, back in November 2015, but where you used to have to camp out on the Boldport website to pick up the latest small-production-run kit there’s a new option: monthly subscription. Members of the Boldport Club get a series of parcels, typically but not always including a kit featuring a Saar-designed printed circuit board but almost always being aimed more at the experienced engineer than the absolute beginner.

For a flavour of what Boldport Club members can expect, Saar sent over two kits: the Touchy, a touch-sensitive microcontroller dedicated to the memory of maker Oliver Coles, and the Ligemdio, a handy-dandy USB-powered LED tester. The latter proved far simpler to build than the former: anyone used to beginner through-hole kits would undeniably find the surface mount components on the Touchy a challenge, but therein lies its attraction.

The soldering on the Dark Control boards, by contrast, was considerably less tricky. Created by the Dark Water Foundation and funded via Kickstarter, the Dark Control boards – one for DC motors and the other for ESC motors – are impressive beasts. Designed to mimic the footprint of the diminutive Raspberry Pi Zero, the boards include the ability to run a minimum of six independent motors, include room for a nine-degree sensor add-on, and can be linked to remote control hardware for network-free control of everything from submarines to aerial drones.

Finally, Debian+Pixel is Raspbian for the masses. Like Raspbian, Debian+Pixel is built on top of Debian Linux; like Raspbian, Debian+Pixel uses the Pixel desktop environment; like Raspbian, Debian+Pixel includes a selection of educational software chosen by the Raspberry Pi community. Unlike Raspbian, though, Debian+Pixel runs on almost any x86 PC – meaning you don’t need a Raspberry Pi.

The software is, as you’d expect from a distribution based on one of the oldest Linux variants around, stable. The Pixel interface looks the same whether you’re running on a Pi or a traditional PC, and only the speed at which programs open and run gives it away. Sadly, there are one or two omissions largely as a result of licensing agreements: the handy Wolfram Alpha application is nowhere to be found, as is the extremely buggy Minecraft Pi Edition that saw one release back in 2013 before being abandoned by the now Microsoft-owned Mojang.

For the full run-down of all these shiny things, plus a whole bunch of other stuff written by people who aren’t me, you can pick up the latest Custom PC magazine in your nearest supermarket, newsagent, or electronically via Zinio and similar digital distribution platforms.

Custom PC Magazine, Issue 158

Custom PC Magazine Issue 158This month, my regular Hobby Tech column is interview-heavy. You’ll find two pages dedicated to Grant Macaulay of Theo Lasers, another two to Barry Getty of the Dark Water Foundation, and a final page reviewing the Genuino Zero microcontroller simply for a change of pace.

First, Grant. I met Grant at the recent Maker Faire UK, where he was showcasing prototypes of the Theo Laser laser cutters. These devices immediately caught my eye: rather than the usual red or beige metal, the cases were made from unfinished laser-cut wood. Each housed a low-power diode laser, and the top-end model was set to retail for around £1,000. A few months later Grant was getting ready to hit the go-live button on a Kickstarter campaign to fund the project, and kindly took some time to walk me through his hopes for Theo Lasers – not to mention the thinking behind his decision to release everything from the hardware designs to the source code under a permissive, open-source licence.

Barry’s another contact from an event: Liverpool MakeFest 2015. There, I talked to Barry as his Dark Water Foundation ran a Lego-based workshop teaching the young and the not-so-young how to build open-source remote-operated submersible vehicles (ROSVs). Like Grant, Barry’s work didn’t stop when my original interview ended and I recently caught up with him to discuss some new designs: the Dark Control boards. Designed for use with the Raspberry Pi, these add-on boards allow for connecting up to six motors – important, he tells me, for full freedom of movement – quickly and easily, while also adding support for radio control systems and inertial measurement units.

Finally, the Genuino Zero. Kindly provided by oomlout as part of a collection of hardware I’m slowly working my way through testing, the Genuino Zero – known as the Arduino Zero in the US – drops Arduino’s traditional 8-bit ATmega microcontroller family in favour of a 32-bit ARM Cortex-M0+. The result is a board that looks for all the world like an Arduino Uno, but which offers considerably different capabilities and improved performance.

All this, and the usual selection of interesting things written by people who aren’t me, can be found in your nearest supermarket, newsagent, or electronically via Zinio and similar digital distribution platforms.