Custom PC, Issue 176

Custom PC Issue 176This month’s Hobby Tech column takes a look at the fascinating ZX Spectrum Next, the impressive RetroFlag NesPi case for the Raspberry Pi, and the book Britsoft.

First, the ZX Spectrum Next. The product of a highly successful crowdfunding campaign that drew in around three quarters of a million pounds from backers across the world, the ZX Spectrum Next is exactly what it sounds like: the next entry in the long-running Sinclair Spectrum family, long after even its most ardent fans had given up hope. Although based around ‘soft’ cores running on a central FPGA, the Next isn’t an emulator: the open design is entirely compatible with every piece of software or hardware you can throw at it, complete with accessories designed for the original Spectrum. It’ll even fit in a 16K/48K chassis, if you don’t mind drilling a few extra holes.

Those holes, you see, are needed for just some of the Next’s shiny new features: a pair of joystick ports, HDMI and VGA video outputs, and even the ability to insert a Raspberry Pi Zero into a special header for use – once the software has been written – as a co-processor, or as it was known at the time a “copper.” There’s room for up to 2MB of RAM, triple-chip FM synthesis, even Wi-Fi network support – though a design flaw discovered shortly after the review went to print means that anyone with the early-release Model 2A will need to solder a small capacitor onto the voltage regulator for full reliability, an issue fixed with Model 2B onward.

The NesPi, by contrast, is a lot simpler. At its heart, it’s a plastic case into which you can install a Raspberry Pi B+, 2, or 3. Its designers, though, have decided to create something a little different, and the Nintendo Entertainment System ‘inspired’ housing also includes daughterboards which offer four front-facing USB ports – two where the controllers would connect and another two under the ‘cartridge’ flap – along with working power and reset buttons. The Ethernet port is also brought to the front, for no readily apparent reason, while the dedicated power board includes a header for an optional cooling fan.

Finally, Britsoft is a book that has been on my shelves awaiting review for a little while now. A Read Only Memories publication, this impressive hardback tome gathers interview content originally created for the 2014 documentary From Bedrooms to Billions charting the rise of the British computer games industry. You’d be hard pushed, off the top of your head, to think of a luminary of the era not included in the title’s impressive 420 pages, and I had but one real complaint: the layout of the book is easier on the eye than the brain, often making it difficult to follow which speaker is talking and which topic you’re reading.

All this, and the usual collection of stuff by other people, is available now at your nearest newsagent, supermarket, or digitally via Zinio and similar services.

Custom PC, Issue 169

Custom PC Issue 169My Hobby Tech column for this month’s Custom PC features three reviews: the CubieBoard 6 single-board computer, the Digilent OpenScope MZ open-hardware multi-function oscilloscope, and a book detailing the rise and fall of gaming legends the Bitmap Brothers.

The CubieBoard 6, to start, was kindly provided by low-power computing specialist New IT. Despite its high version number, the device felt like a blast from the past as soon as I opened the box: it’s based on almost exactly the same form factor as the original CubieBoard and its successor the CubieBoard 2, after which creator CubieTech moved towards bulkier designs with up-to-eight-core processors. A return to form is no bad thing: CubieTech boasts that the CubieBoard 6 can be used as a drop-in replacement for most CubieBoard 1 and 2 projects.

For the review, I ran the device through the usual raft of benchmarks and gave it a direct comparison to the Raspberry Pi 3 with which it competes. One interesting shift from the norm, though, was in thermal imagery analysis which revealed that the CubieBoard’s SATA-to-USB bridge chip draws considerable power even when no SATA device is connected – something that would have been difficult to ascertain any other way.

The OpenScope MZ, meanwhile, is a very different beast – though, technically speaking, also a single-board computer of sorts. The successor to Digilent’s original OpenScope, the OpenScope MZ is a hobbyist- and education-centric open-hardware dual-channel oscilloscope with additional functionality as a function generator, power supply, and logic analyser. Where it differs from its competition, though, is in the presence of a Wi-Fi chip which allows you to connect to the device remotely – which, coupled with the browser-based software used to drive the thing makes it compatible with everything from Windows desktops to a Raspberry Pi or smartphone running the Linux variant of your choice.

Finally, The Bitmap Brothers Universe is a fantastic coffee table tome charting the history of the titular giants of gaming familiar to any Amiga owner present or former. Written based on painstaking interview work by Duncan Harris and published by Read Only Memories, the bulk of the book is in single-colour print with reproduced concept art and illustrations breaking up the prose; the exception comes in the form of colour plates on glossy black paper, which use a series of neat post-process effects in an attempt to simulate their appearance on an old cathode-ray tube (CRT) display – the way they were originally meant to be seen.

All this, and the usual interesting things written by others, can be found on the shelves of your local supermarket, newsagent, or digitally via Zinio and similar distribution services.