Custom PC Magazine, Issue 158

Custom PC Magazine Issue 158This month, my regular Hobby Tech column is interview-heavy. You’ll find two pages dedicated to Grant Macaulay of Theo Lasers, another two to Barry Getty of the Dark Water Foundation, and a final page reviewing the Genuino Zero microcontroller simply for a change of pace.

First, Grant. I met Grant at the recent Maker Faire UK, where he was showcasing prototypes of the Theo Laser laser cutters. These devices immediately caught my eye: rather than the usual red or beige metal, the cases were made from unfinished laser-cut wood. Each housed a low-power diode laser, and the top-end model was set to retail for around £1,000. A few months later Grant was getting ready to hit the go-live button on a Kickstarter campaign to fund the project, and kindly took some time to walk me through his hopes for Theo Lasers – not to mention the thinking behind his decision to release everything from the hardware designs to the source code under a permissive, open-source licence.

Barry’s another contact from an event: Liverpool MakeFest 2015. There, I talked to Barry as his Dark Water Foundation ran a Lego-based workshop teaching the young and the not-so-young how to build open-source remote-operated submersible vehicles (ROSVs). Like Grant, Barry’s work didn’t stop when my original interview ended and I recently caught up with him to discuss some new designs: the Dark Control boards. Designed for use with the Raspberry Pi, these add-on boards allow for connecting up to six motors – important, he tells me, for full freedom of movement – quickly and easily, while also adding support for radio control systems and inertial measurement units.

Finally, the Genuino Zero. Kindly provided by oomlout as part of a collection of hardware I’m slowly working my way through testing, the Genuino Zero – known as the Arduino Zero in the US – drops Arduino’s traditional 8-bit ATmega microcontroller family in favour of a 32-bit ARM Cortex-M0+. The result is a board that looks for all the world like an Arduino Uno, but which offers considerably different capabilities and improved performance.

All this, and the usual selection of interesting things written by people who aren’t me, can be found in your nearest supermarket, newsagent, or electronically via Zinio and similar digital distribution platforms.

The MagPi, Issue 49

The MagPi Issue 49The latest issue of The MagPi, the official magazine of the Raspberry Pi Foundation, includes my two-page interview with Grant Macaulay of Theo Lasers, along with what is now rapidly becoming a go-to image I took of a Raspberry Pi 3 artfully rotated and pasted onto the cover.

I first met Grant at the Maker Faire UK event earlier this year, and got talking to him about the project he had quit his job to build: Theo Lasers. Designed to address the lack of affordable entry-level laser cutters and engravers for hobbyist and educational use, Theo Lasers came from a simple idea: “I’m going to make a laser cutter with a laser cutter,” he laughingly explained in front of a stand of prototypes proving he could do just that.

In the months since the event, Grant has been hard at work improving upon his design. In particular, with the aid of a developer friend, he’s moved from basing the hardware on an Arduino Mega microcontroller to using a Raspberry Pi Zero. In doing so his team developed Theo Controller, a browser-based control and monitoring system which runs entirely on the Pi and which can accept input from any web-compatible device. Coupled with an on-board display, SD card reader, and even the ability to run from battery or solar power, and Grant’s design definitely stands out from the competition even before you see its eye-catching wooden chassis.

Grant’s due to launch a Kickstarter campaign to begin mass production of the Theo Laser cutters in early September, with more details available from the official website. The interview, meanwhile, can be read for free in the Creative Commons licensed The MagPi Issue 49, out now.