Tag Archive for WD Labs

The MagPi, Issue 54

The MagPi Issue 54This month’s The MagPi Magazine, the official publication of the Raspberry Pi community, features my review of an impressive compact network-attached storage (NAS) device: the Nextcloud Box.

Built around the PiDrive storage system from Western Digital Labs and featuring software from the open-source Nextcloud project – itself born from a fork of the Owncloud project – the Nextcloud Box does exactly what it says on the tin: it’s a box which runs Nextcloud.

More accurately, it’s a box that can run Nextcloud. Out of the box, there’s a key piece missing: the packaging reveals a two-part plastic chassis with clever magnetic clasp, a smart split power and data cable, a power supply, a 1TB Western Digital 2.5″ hard drive, and a micro-SD card with the Nextcloud software already loaded onto an Ubuntu Core installation. What you don’t get is a Raspberry Pi: the brains need to be supplied separately, with only the Raspberry Pi 2 supported at the time of writing.

Once you’ve affixed your Pi in place with the bundled Torx screwdriver and screws, you can begin the installation process – which is as simple as putting the micro-SD card in and connecting power. Over the course of a few minutes the operating system is copied to the 1TB hard drive, and then the system reboots ready for configuration.

Nextcloud is, I have to say, incredibly impressive software. While there’s some way to go in certain aspects of usability – in particular setting the NAS up for access from outside your home network requires a bit of fiddling at the command line, registration of a domain name, and manual port forwarding on your router or gateway – the UI and general functionality are both polished to a high standard.

For my full opinion on the device, though, you’ll have to read the review – and you can do so for free by downloading the Creative Commons licensed DRM-free PDF at the official MagPi website, or by picking up a print copy from your nearest supermarket or newsagent.

Custom PC, Issue 161

Custom PC Issue 161In this latest issue of Dennis Publishing’s Custom PC Magazine you’ll find – to no great surprise – my long-running five-page Hobby Tech column, covering the handy thermoplastic FORMcard, the Raspberry Pi powered Nextcloud Box, and Zachtronics’ Shenzhen I/O.

Looking at Shenzhen I/O first: it’s rare that I’ll write a game review as part of Hobby Tech, but Zachtronics’ output is a typical exception. The last I covered was the company’s excellent eight-bit minicomputer ‘simulator’ TIS-100, and Shenzhen I/O builds on that premise with a new near-future theme. The player is placed in the role of a newly-hired engineer at a Chinese electronics concern and given the task of building increasingly complex hardware from simple components using a drag-and-drop interface and a simple TIS-100-like instruction set.

As good as the game itself is – and it’s absolutely fantastic – it’s the manual that really caught my attention. Like the Infocom feelies of old, the document is written entirely in-universe and acts as a series of emails, manual extracts, data sheets, and reference material for the hardware and projects you’ll be tackling through the game. If TIS-100 whet your whistle, you won’t be disappointed with Shenzhen I/O.

The Nextcloud Box, meanwhile, is something a little more professional. Designed around the Western Digital Labs PiDrive product, it offers a simple means to build a single-drive low-power 1TB network attached storage (NAS) device running Nextcloud’s open-source software on top of the Ubuntu Snappy Core operating system.

My review of the Nextcloud Box goes into great detail about its features and capabilities, but there are two things that struck me during the review process and are worth highlighting here. The first is that the WD Labs’ box, emblazoned with Nextcloud branding, really needs a rethink: the cables go through very sharp bends, and those using cheaper cables may find they don’t last very long at all. The other is that getting set up for local access was an absolute breeze, without even the need to connect a monitor to the device – something other Pi-powered project creators could do with copying.

Finally, the FORMcard review. I’ve long been a fan of Sugru, a mouldable silicone putty which hardens into rubber overnight, and when I was contacted to see if I would be interested in giving rival FORMcard a try I jumped at the chance. Created by Peter Marigold and crowdfunded into production, FORMcard is a starch-based bioplastic which softens with the application of heat. Simply take one of the credit card footprint plastic sheets, dunk it in hot water for a minute, then mould it to your hearts desire. Unlike Sugru, it hardens in minutes and is fully reusable – assuming you can remove it from whatever surface you smeared it over – but it’s, for obvious reasons, not the material to use if you’re patching something that gets hot.

For my full opinions on all three items, plus the usual array of interesting things written by people who aren’t me, you can pick up the latest Custom PC Magazine from your nearest newsagent, supermarket, or from the comfort of right where you are now via Zinio and similar digital distribution platforms.