MinnowBoard

Linux User & Developer, Issue 150

Leave a comment

Linux User & Developer, Issue 150This month’s Linux User & Developer includes both my regular four-page news spread and a review of the MinnowBoard Max single-board computer from Intel.

The MinnowBoard Max is the latest in Intel’s increasingly scattershot efforts to make an impact in the hobbyist-grade single-board computer market. Like its predecessor, the MinnowBoard Max is open hardware and produced in partnership with CircuitCo – the company behind the BeagleBoard and BeagleBone Black – and features the x86 instruction set architecture. Where it differs is in how easy it is to use and how much power it can offer.

I reviewed the original MinnowBoard design back in Issue 131, and found it lacking on a couple of levels: the single-core Atom chip was woefully underpowered compared to rival boards like the Gizmo, and its 32-bit UEFI firmware made it near-impossible to boot any operating system bar the bundled and extremely cut-down Yocto Linux installation.

The MinnowBoard Max clearly demonstrates that Intel is listening to feedback, though. The 32-bit single-core Atom is now a 64-bit dual-core model, and comes complete with a 64-bit UEFI implementation. The result: significantly improved compatibility and performance. A single-core version, slightly cheaper and drawing less power, is also available but not something I have yet tested.

As to whether the MinnowBoard Max is a worthy investment in a market near-monopolised by chips based on the ARM instruction set architecture, you’ll have to read the full review to find out.

The review, my four-page spread of all the latest happenings in the world of open-everything, and a whole bunch of stuff written by other people is available now from your local newsagent, supermarket, or digitally via Zinio and similar distribution services.

Custom PC, Issue 136

Leave a comment

Custom PC Issue 136This month’s Hobby Tech column for Custom PC magazine reviews a next-generation version of the Fuze Powered by Raspberry Pi kit, previews the upcoming MinnowBoard Max from Intel, and publishes an interview with Sam ‘MrSidC64’ Dyer, author of Commodore 64: A Visual Commpendium – the spelling a deliberate pun on ‘Commodore,’ if you were wondering.

First, the Fuze T2 review. I’d already looked at the original Fuze, courtesy its inventor Jon Silvera, back in Issue 124, and little has changed from the aerial view: it’s still a robust steel case inspired by the BBC Micros of the 80s, designed to house a keyboard, Raspberry Pi and a break-out board for the general-purpose input-output (GPIO) pins, sold either on its own or as a bundle with child-friendly electronics tutorials and a handful of simple components for experimentation. Looking in more detail, however, shows that plenty has changed: following feedback, Jon has redesigned to case to include the ability to mount the Pi sideways to prevent little fingers pulling out the SD card, added Lego-compatible holes to the side, and best of all included a four-port USB hub with integrated power supply that provides proper 5V/500mA ports while simultaneously powering the Pi itself. A much-improved GPIO break-out board is another welcome addition, featuring compatibility with existing add-on boards as well as integrated analogue-to-digital and hardware pulse-width modulation (PWM) pins – something the Pi alone sorely lacks.

The MinnowBoard Max, meanwhile, is easily recognisable as a new design entirely. Designed to replace Intel’s old MinnowBoard, reviewed back in Issue 122, the Max features a proper 64-bit dual-core Atom processor with 64-bit UEFI implementation – meaning that the limited compatibility of its predecessor is a thing of the past. The design is more compact, the entire platform more accessible to beginners, and as usual it’s entirely open in both software and hardware – even the UEFI BIOS is based on Intel’s open-source code. For those who find ARM development boards too much of a stretch after years of x86 programming, it’s certainly worth investigating and I was impressed with the pre-release prototype I was provided. Sadly, the release of the final production model has hit a few last-minute delays – although I’m expecting stock of both the dual-core and single-core variants to appear in the channel before the end of the year.

Lastly, my interview with Sam Dyer. A graphic designer by trade, Sam launched a Kickstarter campaign to crowd-fund a new coffee table book all about the software available for the Commodore 64, his first real computer. As a massive Commodore fan myself, I was a backer and when the book arrived earlier this year I knew I would have to write about it. Sam was kind enough to give me some of his time to answer questions about his early days of computing, the technology behind capturing the images that make up the book, and its at-the-time impending successor Commodore Amiga: A Visual Commpendium – which yesterday closed funding with a massive £130,000 raised from fellow Commodore fans. Yes, including me.

All this, plus a variety of words written by people who aren’t me, can be yours now with a trip to the newsagent or supermarket, or from the comfort of your home or office via Zinio or similar digital distribution services.

Linux User & Developer, Issue 131

Leave a comment

Linux User & Developer Issue 131The cover of this month’s Linux User & Developer Magazine highlights two of my latest features: a review of the Intel MinnowBoard and an interview with its evangelist Scott Garman. The direct comparison to the far cheaper Raspberry Pi, just to clarify, was an editorial decision in which I had no part.

The MinnowBoard is an interesting piece of equipment: based on a single-core 32-bit Intel Atom processor, it packs surprising power into a sub-10W package: gigabit Ethernet, USB, SATA and audio ports are all present and correct, while a ‘Lure’ connector gives access to additional capabilities including several PCI Express lanes.

The hardware itself isn’t the most interesting feature of the MinnowBoard, however. Intel has opted to make the board fully open, releasing schematics, Gerbers, firmware source code, and a Board Support Package (BSP) for the Yocto Project – certification for which the board carries proudly.

In this, the MinnowBoard is head and shoulders above the Raspberry Pi, which is a closed design, while offering significantly more power. Sadly, that power comes at a considerable price – you can expect to pay at least £160 for the MinnowBoard compared to £30 for the Pi. The MinnowBoard also struggles to compete with AMD’s equivalent, the Gizmo from Sage Electronics, which features a faster 64-bit dual-core processor with greater performance and wider OS compatibility and comes bundled with useful tools for embedded hardware and software development at a very similar cost.

Still, it’s an exciting project – and one Scott Garman, Yocto Project contributor, Intel employee, and the evangelist for the MinnowBoard project, is justifiably excited about. In my interview, Scott provided hints at the reasoning behind certain design decisions for the MinnowBoard, promises of increased compatibility with operating systems other than the bundled Angstrom Linux build, and admitted his undying respect for the Raspberry Pi Foundation.

All this, plus my usual four pages of Linux, open source, open hardware and open governance news, can be found betwix the pages of Linux User & Developer at your local newsagent, supermarket, or online via the Zinio digital distribution platform and others.

Custom PC, Issue 122

3 Comments

Custom PC Issue 122In the latest of my eponymous columns – Gareth Halfacree’s Hobby Tech, if you haven’t been following – I take a UK-exclusive look at the Intel MinnowBoard, show readers how to create a 21st century fax machine with an inexpensive thermal printer and an Arduino microcontroller, and investigate the 1980s’ answer to solid-state storage.

First, the MinnowBoard. Intel’s first foray into open hardware, the MinnowBoard is a clear response to the success of the low-cost Raspberry Pi. Although the low-cost part may have been lost along the way – the MinnowBoard retails at around £170, far more than the £30 the top-end Raspberry Pi will cost you – it offers considerable extra power including a 32-bit x86 Atom processor, 1GB of RAM, on-board SATA and even PCI Express expansion.

Another advantage to the MinnowBoard, and a surprise from Intel, is that it’s open hardware: the company has released Board Specification Packages (BSPs) for Yocto Project certification along with Gerbers, schematics and bills of material – everything you could need to build one of your very own. In this, it’s similar to AMD’s Gizmo board – although that features a BIOS which offers greater out-of-the-box compatibility with various operating systems, a more powerful dual-core processor and a slightly smaller footprint.

This month’s tutorial focuses on turning an inexpensive thermal printer – kindly provided by local hobbyist supply house oomlout – into an Arduino-powered teleprinter. Using the Hello, Printer design from GoFreeRange, it creates a simple internet-connected device that will accept text or image data from any web-capable client – and I’ve found it’s absolutely top-hole for shopping lists and reminders.

Sadly, there is a printing error – oh, the irony – in the tutorial: the last entry in the bill of materials, the 400-point breadboard, is missing the link to purchase. If you’re after one, you can find it on oomlout’s website.

Finally, the vintage computing section this month focuses on an all-but abandoned technology: EPROMs. The precursor to modern flash memory, as found in solid-state drives, EPROMs were an incredibly common sight: unlike traditional PROMs, they could be erased using an ultra-violet light ready for reuse and were typically used to hold program information or BIOS data. As something of a computer historian, I find myself using the chips a lot – I was burning a Donkey Kong board for the Nintendo PlayChoice-10 when I got the idea for the feature – but they’re something those who are new to computing are unlikely to see in the wild.

All this, plus a bunch of stuff from people who aren’t me, in Custom PC Issue 122. As usual, you can find it in all good newsagents and supermarkets, or stay indoors and pick up a digital copy from services like Zinio if you’d prefer.