Projects

PC Pro, Issue 298

Leave a comment

PC Pro Issue 298The big news of the last few weeks has, of course, been the launch of the Raspberry Pi 4 single-board computer – covered in considerable detail in my benchmark piece over on Medium. To support its in-house review coverage, PC Pro Magazine commissioned me to come up with project ideas that take full advantage of the Raspberry Pi 4’s new capabilities.

The first of a new family of Raspberry Pi products designed to do away with some of the biggest criticisms levelled at earlier models, the Raspberry Pi 4 includes a significantly more powerful processor, improved graphics capabilities, dual-4K video output and hardware H.265 4K video decoding, up to 4GB of RAM, true gigabit Ethernet networking, and two USB 3.0 ports sharing a high-speed PCI Express link back to the Broadcom BCM2711B0 system-on-chip (SoC) at the board’s heart.

My feature covers how these new capabilities can be used in a variety of real-world use-cases, from acting as a desktop replacement for lightweight browsing and productivity use to a low-power 4K-capable home cinema system. The new USB 3.0 ports are perfectly suited to turning a couple of external hard drives into a low-cost network-attached storage (NAS) system, while the improved graphics make gaming more tempting.

There’s even something for the enterprise crowd to sink its teeth into: the dual display capabilities mean that the Raspberry Pi 4 is perfect for digital signage, Citrix support on day one turns it into a dual-screen thin client, and the more powerful networking can be combined with a USB 3.0 Ethernet adapter to create an energy-efficient router, firewall, or other network appliance.

For the full low-down on what the Raspberry Pi 4’s new features could do for you, pick up the latest PC Pro from your nearest supermarket, newsagent, or digitally via Pocketmags or similar services.

The Official Raspberry Pi Projects Book, Volume 2

Leave a comment

The Official Raspberry Pi Projects Book Volume 2The Raspberry Pi Foundation has published the second in its Official Raspberry Pi Projects Book series, and as usually there’s a whole raft of my material to be found within its black-clad pages.

The book begins with practical guides and tutorials, including my guide to adding a physical reset switch to the RUN header on any modern Raspberry Pi Zero. It’s the review section where you’ll find the bulk of my work, however, beginning with a look at a couple of handy tools for makers: the Proster VC99 multimeter and the Tenma 60W Digital Soldering Station.

Further on you’ll find detailed reviews of two microcontroller-based products which can interface with the Raspberry Pi or operate entirely standalone: the Adafruit Gemma Starter Kit and the Bare Conductive Touch Board Starter Kit. The former acts as an introduction to the world of conductive thread, while the latter uses conductive ink to complete the circuits in its bundled guide.

Finally, my contributions to the Projects Book Volume 2 end with a review of the Pimoroni pHAT DAC, a compact add-on for the Raspberry Pi Zero – though mechanically compatible with any other modern Pi model bar the bare Compute Module family – which adds a high-quality digital-to-analogue converter (DAC) and 3.5mm jack. Those looking to wire a Pi into the stereo systems can also solder on optional stereo RCA jacks, which I thought was a particularly nice feature.

As with the previous book in the series, the Official Raspberry Pi Projects Book Volume 2 is available to download free under the Creative Commons licence from the official website.

The MagPi, Issue 40

4 Comments

The MagPi Issue 40This month’s MagPi, the official magazine of the Raspberry Pi Foundation, is just a little bit special: it is, to my knowledge, the first magazine ever to include a cover-mounted computer. The release of the magazine today also represents the launch of a brand-new Raspberry Pi model: the Raspberry Pi Zero.

I’ve been lucky enough to have been playing with the Pi Zero for some time, having worked on three of the hardware projects you’ll find between the covers of this extra-special issue. After peeling the Pi Zero from the cover, readers will be shown how to solder general-purpose input/output (GPIO) headers onto its otherwise extremely flat face, connect its serial port to a computer for use as a true random number generator (TRNG), and use it with an existing HAT add-on to act as a mood lamp.

The three projects I created for this issue were chosen from a long, long list. The Pi Zero is an exciting device: it features the same specifications as the Raspberry Pi Model A, but in a brand-new form factor a fraction of the size of the original. Naturally, some features have been cut: just like the Model A there’s no Ethernet chip, but there are also no CSI or DSI connectors and no analogue audio or video ports – though composite video is broken out to a solder pad for the adventurous. The ports that do remain have also been modified: the full-size HDMI port is replaced by a mini-HDMI, and the full-size USB port is a micro-USB port which requires a USB On-The-Go (OTG) adapter before it can be connected to standard USB peripherals.

In doing this, the Foundation has created a device that excites me even more than the full-size models. With a production cost so low that it can be cover-mounted on a high-street magazine, it’s now possible to put a full Linux computer in more project than ever before – and with a simple low-cost USB OTG adapter and a Wi-Fi dongle, it can be networked for a total outlay of well below $10. It is, in short, a game-changer, and I look forward to working on many more Pi Zero-related projects in the near future.

If that wasn’t enough, you’ll also find my review of the Tenma 60W Digital Soldering Station which has been my trusty companion in various projects over the last couple of years. It’s always nice to be able to give a device a good, long-haul test before drawing your conclusions and I’ve certainly put the miles in on the Tenma. As I warn in the review a hobbyist doesn’t strictly need a soldering station, but it does make life easier – and the low cost of this unit, purchased from CPC, makes it easy to recommend for those who fancy an upgrade.

All this, plus more – and, remember the cover-mounted Pi Zero – is available in your nearest WH Smith. The magazine itself is also available as a DRM-free PDF download from the official website, licensed under Creative Commons terms, but obviously you’ll have to buy a Pi Zero separately if you want to follow along with any of my projects.

The Official Raspberry Pi Projects Book

1 Comment

The Official Raspberry Pi Projects BookI’ve been writing for The MagPi, the official magazine of the Raspberry Pi Foundation, since its major relaunch under the editorial leadership of Russell Barnes. That’s long enough to have built up a reasonable amount of content – and it’s that content you’ll find the The Official Raspberry Pi Projects Book, published today under a Creative Commons licence.

Inside the 200 page book, which is available in print and as a DRM-free PDF download, you’ll find several pieces of my work. The first is entitled ‘Crowdfundings Greatest Hits,” an eight-page investigation of some of the biggest Pi-related crowd-funded projects around – and some of its biggest failures, too. This was a great piece to work on, involving plenty of research and interviews, and was the first to break the news that Azorean was relying on additional external investment to fulfil rewards in its Ziphius campaign – rewards which have still not been fulfilled, more than a year after its original launch date.

You’ll also find reprints of several of my reviews: there’s the Pimoroni Display-o-Tron 3000 add-on, the Weaved IoT remote access system, the 4Tronix Agobo low-cost robot chassis, Velleman’s 3D Printing Pen, and the excellent Swanky Paint from local coding outfit WetGenes. Naturally, each is accompanied by photography which is also published under a Creative Commons licence – and is, as always, available for reuse from my Flickr page.

This marks the first book to which I have contributed which is published under a Creative Commons licence, but it certainly won’t be the last. Allowing for free non-commercial reuse and encouraging sharing and copying, it’s an approach at the complete opposite end of the spectrum to that taken by most publishers – and one of which I heartily approve.

You can download The Official Raspberry Pi Projects Book for free from the official website, while print copies are available from the swag store or the usual high-street outlets.