The Raspberry Pi Foundation has published the second in its Official Raspberry Pi Projects Book series, and as usually there’s a whole raft of my material to be found within its black-clad pages.
The book begins with practical guides and tutorials, including my guide to adding a physical reset switch to the RUN header on any modern Raspberry Pi Zero. It’s the review section where you’ll find the bulk of my work, however, beginning with a look at a couple of handy tools for makers: the Proster VC99 multimeter and the Tenma 60W Digital Soldering Station.
Further on you’ll find detailed reviews of two microcontroller-based products which can interface with the Raspberry Pi or operate entirely standalone: the Adafruit Gemma Starter Kit and the Bare Conductive Touch Board Starter Kit. The former acts as an introduction to the world of conductive thread, while the latter uses conductive ink to complete the circuits in its bundled guide.
Finally, my contributions to the Projects Book Volume 2 end with a review of the Pimoroni pHAT DAC, a compact add-on for the Raspberry Pi Zero – though mechanically compatible with any other modern Pi model bar the bare Compute Module family – which adds a high-quality digital-to-analogue converter (DAC) and 3.5mm jack. Those looking to wire a Pi into the stereo systems can also solder on optional stereo RCA jacks, which I thought was a particularly nice feature.
As with the previous book in the series, the Official Raspberry Pi Projects Book Volume 2 is available to download free under the Creative Commons licence from the official website.
Following on from last month’s Pi Zero extravaganza, my workload for the latest issue of the Raspberry Pi Foundation’s MagPi was pretty light: a single review, looking at the wonderful Bare Conductive Touch Board Starter Kit.
I actually received and wrote this review some time ago, but various flat-plan changes led to it being bumped from its planned issue with the first suitable gap being in this New Year’s edition – published, as is so often the case with print publications, just before Christmas. Thankfully, the Touch Board isn’t really something that ages, and the model you would buy today is the same as the one I reviewed a few months back.
For those not familiar with the company’s output, Bare Conductive made a name for itself with a conductive paint suitable for making paper-based circuits. This was followed by the Touch Board, an Arduino-compatible microcontroller with built in capacitive touch and distance-tracking sensor capable of playing MP3 audio files from a micro-SD card depending on which of its inputs were triggered. The Starter Kit, then, unsurprisingly brings both inventions together: there’s a pot of the conductive paint plus a tube for more accurate dispensing, a brush, a Touch Board, crocodile clips, a rechargeable speaker, micro-SD, USB cable, and everything you need to build three example projects.
The bundled book is extremely good: printed on quality paper in full colour and with a modern layout, it goes some way to justifying the far-from-impulse near-£100 price point of the kit. So too does the out-of-box experience: MP3 files are pre-loaded on the micro-SD card, and if you connect the touch board to a USB port for power and poke each contact in turn you’ll be given voice guidance through its capabilities and use.
If you want to read more about the kit, the review is available in the free MagPi Issue 41 PDF or in print at newsagents and supermarkets throughout the UK.
To deal with the latter first, the Widdop is a bit of an odd thing to review at first glance as it was available exclusively to those who attended this year’s Wuthering Bytes festival. There’s method in my madness, though: it’s a variant of the Cordwood puzzle designed by Saar Drimer at Boldport, and a review of the Widdop is equally applicable to its predecessor. In short, it’s a soldering kit sans instructions: two artistically designed and matching circuit boards are supplied along with a fistful of components, and it’s up to the user to not only work out how it should be assembled but then how to interface it to a microcontroller or other controlling system – great fun!
The Bare Conductive Touch Board, by contrast, is readily available. I had previously experienced the delights of the Touch Board, an Arduino-compatible microcontroller with built-in capacitive touch sensing and audio playback capabilities, at the Manchester MakeFest where the Manchester Arduino group were demonstrating Touch Board-powered musical food bowls. The Starter Kit, though, is something else entirely. Packed in an oversized box it contains everything you need to get started, from the conductive paint which made Bare Conductive famous to the Touch Board itself pre-loaded with a voice-led 12-step tutorial.
The booklet is the real prize, though. Walking the user through three projects, it’s one of the best I’ve seen: well produced with exciting photographs and a great attention to detail. The primary project, too, is innovative: a stencil and overlay in the shape of a house demonstrates how the conductive paint can be used to create interactive art, with the remaining two projects offering an intruder alarm – for bare-footed intruders, at least – and a look at adding interactivity to household objects.
Finally, the Fitlet. I’ve been a fan of CompuLab’s tiny Linux-compatible PCs for a while, but the Fitlet is the first I’ve had a chance to review. Supplied in its top-end form with an AMD A10-Micro6700T quad-core processor, it has the grunt of a low-mid-range office desktop but in a passively cooled form factor little larger than a cased Raspberry Pi. Compared to the already diminutive Intel NUC, it’s absolutely tiny: the smallest NUC has a volume of 0.417 litres, while the Fitlet is just 0.215 litres in volume.
Despite its size, there’s a bit of everything: as reviewed, the Fitlet offers on-board Wi-Fi and Bluetooth, dual gigabit Ethernet ports, three USB 2.0 and two USB 3.0 ports, powered eSATA, and even a GPIO connector – which, sadly, lacked driver support at the time of my review, an issue CompuLab has now resolved with the release of an official Software Development Kit (SDK). Running Linux Mint 17.2 but compatible with most any operating system that would run on an x86-64 desktop, the CompuLab is definitely one of the most exciting devices I’ve had the privilege to test recently – although that excitement is tempered by a £300 selling price in the UK, putting it on-par with the more computationally powerful Intel NUC.
All this, plus interesting stuff written by people who aren’t me, can be found between the covers of Custom PC Issue 148 at your nearest newsagent, supermarket, or from the comfort of your own home via digital distribution services such as Zinio.